Supermicro MBI-6219G-T, Руководство пользователя

Страница: 64 / 85

MBI-6219G-T MicroBlade Module User’s Manual
14
Table 5-10. Serial Port Console Redirection Sub-menu
Menu Option Description
COM1 Console Redirection
Select Enabled to enable console redirection support for the COM1 serial
port. The options are Enabled and
Disabled .
SOL Console Redirection
Select Enabled to enable console redirection support for SOL. The options
are
Enabled and Disabled.
 Console Redirection
Settings
This feature allows the user to specify how the host computer will
exchange data with the client computer, which is the remote computer
used by the user.
Terminal Type
This feature allows the user to select the target terminal emulation type
for Console Redirection. Select VT100 to use the ASCII Character set.
Select VT100+ to add color and function key support. Select ANSI to
use the Extended ASCII Character Set. Select VT-UTF8 to use UTF8
encoding to map Unicode characters into one or more bytes. The
options are ANSI, VT100,
VT100+ , and VT-UTF8.
Bits Per second
Use this feature to set the transmission speed for a serial port used in
Console Redirection. Make sure that the same speed is used in the
host computer and the client computer. A lower transmission speed
may be required for long and busy lines. The options are 9600, 19200,
38400, 57600 and
115200 (bits per second).
Data Bits
Use this feature to set the data transmission size for Console
Redirection. The options are 7 Bits and
8 Bits .
Parity
A parity bit can be sent along with regular data bits to detect data
transmission errors. Select Even if the parity bit is set to 0, and the
number of 1's in data bits is even. Select Odd if the parity bit is set to 0,
and the number of 1's in data bits is odd. Select None if you do not want
to send a parity bit with your data bits in transmission. Select Mark to
add a mark as a parity bit to be sent along with the data bits. Select
Space to add a Space as a parity bit to be sent with your data bits. The
options are
None , Even, Odd, Mark and Space.
Stop Bits
A stop bit indicates the end of a serial data packet. Select 1 Stop Bit for
standard serial data communication. Select 2 Stop Bits if slower
devices are used. The options are
1 and 2.
Flow Control
Use this feature to set the flow control for Console Redirection to
prevent data loss caused by buffer overflow. Send a “Stop” signal to
stop sending data when the receiving buffer is full. Send a “Start” signal
to start sending data when the receiving buffer is empty. The options
are
None and Hardware RTS/CTS.
VT-UTF8 Combo Key
Support Select Enabled to enable VT-UTF8 Combination Key support for ANSI/
VT100 terminals. The options are
Enabled and Disabled .
Recorder Mode
Select Enabled to capture the data displayed on a terminal and send it
as text messages to a remote server. The options are
Disabled and
Enabled.
Resolution 100x31
Select Enabled for extended-terminal resolution support. The options
are Disabled and
Enabled .
Legacy OS Redirection
Resolution
Use this feature to select the number of rows and columns used in
Console Redirection for legacy OS support. The options are 80x24 and
80x25 .