H13DSH User's Manual
54
L1 Stream HW Prefetcher / L2 Stream HW Prefetcher
This setting is used to enable or disable the L1/L2 Stream Hardware Prefetcher. The options
are Disabled, Enabled and
Auto
.
CCD Control
Use this setting to disable CCDs in the CPU. Options include
Auto
, 2 CCDs, 4 CCDs, 6CCDs,
8 CCDs and 10 CCDs.
Core Control
This sets the number of cores to be used by your system. Once this option has been used to
remove any cores, a power cycle is required in order for the future selections to take effect.
Options include
Auto
, ONE (1+0), TWO (2+0), THREE (3+0), FOUR (4+0), FIVE (5+0), SIX
(6+0) and SEVEN (7+0). If unsure, leave this to Auto.
SVM Mode
This setting Disables or
Enables
CPU Virtualization.
CPU1 Information/CPU2 Information
CPU Configuration
These sections are for informational purposes. They will display some details about the
detected CPUs on the motherboard, such as:
•
CPU Version
•
Number of Cores Running
•
Processor Family
•
Processor Model
•
Microcode Patch Level
•
L1 Instruction Cache (Size/Method)
•
L1 Data Cache (Size/Method)
•
L2 Cache (Size/Method)
•
L3 Cache per Socket (Size/Method)
CPU1 PCIe Package Group P2
This setting selects the PCIe port bifurcation configuration for the selescted slot. The options
include
Auto
, x4x4x4x4, x4x4x8, x8x4x4, x8x8 and x16.
CPU1 PCIe Package Group G2
This setting selects the PCIe port bifurcation configuration for the selescted slot. The options
include
Auto
, x4x4x4x4, x4x4x8, x8x4x4, x8x8 and x16.
