51
Chapter 2: Installation
Onboard Power OK LED (LED6)
LED6 is an onboard power OK LED. When this LED6 is lit, it means the system is turned
on, and all the system power rails are ready. When the system is turned off, or any one of
the system power rails fail, this LED will turn off. Turn off the system, and unplug the power
cable before removing or installing any component(s).
Onboard Power
LED Indicator
LED Color
Definition
Off
System Off (power cable not connected)
Green
System On, Power OK
M.2 Error LED (LED9 and LED11)
The M.2 Error LED indicates an error was detected on the device installed on either M.2-C1
(LED9) or M.2-C2 (LED11).
M.2 Active
LED Indicator
LED Color
Definition
Off
Off (Normal)
Green
On (Device error detected)
UID LED (LED1)
See page 35.
