H11SSW-iN/NT User's Manual
66
NB Configuration
Determinism Slider
Use this setting to configure the Determinism Slider. Options include
Auto
, Power and
Performance.
cTDP Control
Use this setting to configure the cTDP Control. Options include Manual and
Auto
.
IOMMU
Use this setting to enable/disable IOMMU. Options include Enabled,
Disabled
and Auto.
ACS Enable
Use this setting to enable/disable ACS. Options include Enabled, Disabled and
Auto
.
Memory Configuration
Memory Clock
This setting allows you to select different memory clock speed. Options include
Auto
and
speed settings from 1333Mhz to 2666Mhz.
Memory Interleaving
This setting controls fabric level memory interleaving. Note that the channel, die and socket
have requirements on memory populations and it will be ignored if the memory doesn't
support the selected option. Options include None, Channel, Die, Socket and
Auto
.
Memory Interleaving Size
This setting controls the memory interleaving size. This determines the starting address of
the interleave (bit 8, 9, 10 or 11). Options include 256 Bytes, 512 Bytes, 1 KB, 2 KB or Auto.
Chipset Interleaving
This setting controls interleave memory blocks across the DRAM chip for node 0. The
options are Disabled and
Auto
.
BankGroupSwap
This setting controls the Bank Group Swap. The options are Enabled, Disabled and
Auto
.
