Supermicro FatTwin F617H6-FTL+, Руководство пользователя

Страница: 78 / 140

5-24
FatTwin F617H6-FTL+/FTPTL+ User's Manual
GLAN Enable/Disable
JPL1 enables or disables LAN Port1/
LAN Port2 on the motherboard. See the
table on the right for jumper settings.
The default setting is Enabled.
Watch Dog Enable/Disable
Watch Dog (JWD1) is a system moni-
tor that will reboot the system when a
software application hangs. Close Pins
1-2 to reset the system if an applica-
tion hangs. Close Pins 2-3 to generate
a non-maskable interrupt signal for the
application that hangs. See the table on
the right for jumper settings. Watch Dog
must also be enabled in the BIOS.
VGA Enable
Jumper JPG1 allows the user to enable
onboard VGA support. The default
setting is on Pins 1-2 to enable VGA
support. See the table on the right for
jumper settings.
BMC Enable
Jumper JPB1 allows you to enable
t h e e m b e d d e d B M C ( B a s e b o a r d
Management) Controller to provide IPMI
2.0 support on the motherboard. See
the table on the right for jumper settings.
I 2 C Bus to PCI-Exp. Slots
Jumpers JI
2
C1 and JI
2
C2 allow you to
connect the System Management Bus
(I
2
C) to PCI-Express slots. The default
setting is Open to disable the connection.
Watch Dog (JWD1)
Jumper Settings
Jumper Setting Defi nition
Pins 1-2 Reset (default)
Pins 2-3 NMI
Open Disabled
VGA Enable (JPG1)
Jumper Settings
Jumper Setting Defi nition
Pins 1-2 Enabled (Default)
Pins 2-3 Disabled
BMC Enable (JPB1)
Jumper Settings
Jumper Setting Defi nition
Pins 1-2 BMC Enable (Default)
Pins 2-3 Normal
I2C to PCI-Exp (JI2C1/JI2C2)
Jumper Settings
Jumper Setting Defi nition
Pins 1-2 Enabled
Pins 2-3 Disabled (Default)
GLAN Enable (JPL1)
Jumper Settings
Jumper Setting Defi nition
Pins 1-2 Enabled (default)
Pins 2-3 Disabled