Supermicro FatTwin F617H6-FTL+, Руководство пользователя

Страница: 15 / 140

1-5
Chapter 1: Introduction
SATA Drive Power
Please connect the onboard power cables (four each CBL-0511L and CBL-0485L)
from each node's serverboard to the SATA backplane board in the node tray in
order to provide power to the drives.
Super I/O
The Super I/O provides functions that comply with ACPI (Advanced Confi guration
and Power Interface), which includes support of legacy and ACPI power
management through an SMI or SCI function pin. It also features auto power
management to reduce power consumption.
1-3 Server Chassis Features
The following is a general outline of the main features of the F414IS server chassis.
System Power
The F414IS chassis model includes two high-effi ciency 94%+ Platinum certifi ed
redundant 1620 Watt power supplies. In the unlikely event your power supply fails,
replacement is simple and can be accomplished without tools.
SAS/SATA Subsystem
The F414IS supports up to twelve (12) fi xed SAS/SATA drives (plus two (2) optional
2.5" SATA drives) for each node for a total of fi fty-six (56) drives. The F414IS
supports 3.5" and optional 2.5" hard drives. These drives are fi xed units and are
connected to three backplanes (that provides power and control) per node.
Note: For more information, visit our Web site at: http://www.supermicro.com .
I/O Ports
The F414IS is an proprietary form factor chassis designed to be used in a 4U
rackmount confi guration. The F414IS chassis provides two low-profi le add-on
card slots, a VGA port, two USB 2.0 ports, one IPMI Ethernet port and two gigabit
(F617H6-FTL+) or two 10G (F617H6-FTPTL+) Ethernet ports per node.