Supermicro FatTwin F617H6-FTL+, Руководство пользователя

Страница: 3 / 140

iii
Preface
Preface
About This Manual
This manual is written for professional system integrators and PC technicians. It provides
information for the installation and use of the FatTwin™ F617H6-FTL+/FTPTL+.
Installation and maintainance should be performed by experienced technicians only.
The FatTwin F617H6-FTL+/FTPTL+ is a high-end server based on the
F414IS-R1K62B 4U rackmount chassis and a dual processor X9DRFF-7G+/7TG+
serverboard. All models have four serverboard nodes each with an IPMI LAN port
and twelve (12) 3.5" fi xed HDD drives and two (2) 2.5" optional fi xed HHD drives
each per node. The F617H6-FTPTL+ server uses 10-Gigabit LAN ports whereas
the F617H6-FTL+ server uses Gigabit LAN ports.
Manual Organization
Chapter 1: Introduction
The fi rst chapter provides a checklist of the main components included with
the server system and describes the main features of the X9DRFF-7G+/7TG+
serverboards and the F414IS-R1K62B chassis.
Chapter 2: Server Installation
This chapter describes the steps necessary to install the FatTwin F617H6-FTL+/FTPTL+
into a rack and check out the server confi guration prior to powering up the system.
If your server was ordered without processor and memory components, this chapter
will refer you to the appropriate sections of the manual for their installation.
Chapter 3: System Interface
Refer here for details on the system interface, which includes the functions and
information provided by the control panel on the chassis as well as other LEDs
located throughout the system.
Chapter 4: System Safety
You should thoroughly familiarize yourself with this chapter for a general overview
of safety precautions that should be followed when installing and servicing the
FatTwin F617H6-FTL+/FTPTL+.
Chapter 5: Advanced Serverboard Setup
Chapter 5 provides detailed information on the X9DRFF-7G+/7TG+ serverboards,
including the locations and functions of connections, headers and jumpers. Refer
to this chapter when adding or removing processors or main memory and when
reconfi guring the serverboard.