Supermicro FatTwin F617H6-FTL+, Руководство пользователя

Страница: 73 / 140

Chapter 5: Advanced Motherboard Setup
5-19
5-7 Connector Defi nitions
ATX Power Connector
Two 8-pin power connectors (JPW1/
JPW2) and a 4-pin power connector
(JPW3) are used to provide power to the
serverboard. In addition, two 8-pin power
connectors (HDD_PWR1/2) are also
located onboard to provide power from
the serverboard to the HDD backplane
for HDD device use. Do not use these
connectors for other purposes. All power
connectors mentioned above meet the
SSI EPS 12V specification. See the
tables on the right for pin defi nitions.
12V 8-pin PWR (JPW1/2)
Pin Defi nitions
Pins Defi nition
1- 4 Ground
5-8 +12V
12V 4-pin PWR (JPW3)
Pin Defi nitions
Pins Defi nition
1 Ground
2 Ground
3 5V SB
4 PS_ON_N
HDD PWR
Pin Defi nitions
Pins Defi nition
1- 4 Ground
5-6 +12V
7-8 +5V
Video Connection
A Video (VGA) port is located next to the
LAN Port 2 on the I/O backplane. Refer
to the layout below for the location.
Universal Serial Bus (USB)
Two Universal Serial Bus ports (USB0,
USB1), located on the I/O front panel,
provide front-accessible USB support.
In addition, a Type A USB connector
(JUSB2), located next to the 4-pin
JIPMB1 connector, also provides front-
accessible USB support.
Front Panel USB 0/1
& Type-A USB 2
Pin Defi nitions
Pin# Defi nition
1 +5V
2 PO-
3 PO+
4 Ground
5 NA