Supermicro C7C232-CB-ML, Руководство пользователя

Страница: 31 / 107

31
Chapter 2: Installation
I-SATA0 I-SATA1 PCHDR1
BUZ1
NGFFB1
DBGH1 TPMH1
CN1
I-SATA5
I-SATA4 I-SATA3
USB2/3 (2.0)
CRF1
WP1
PCH SLOT5 PCI-E 3.0 X1
PCH SLOT6 PCI-E 3.0 X1
CPU SLOT7 PCI-E 3.0 X16
AUDF1
SPK1
CSOPN1
OBR1
USB8/9 (3.0)
CMOS1
GPIO1
GPIO2
COM1
LEDH1
BT1
CN2
FANC1
FANS1
FANS2
DIMMA2
DIMMB1
KB/MOUSE
USB0/1
LAN1
USB4/5/6/7
(3.0)
AUDIO
HS1
C7C232-CB-ML
DIMMA1
DIMMB2
Rev. 1.00
CPU
PCH
USB2F1
USB3F1
DIMM Installation
1. Insert DIMM modules in the following
order: DIMMB2, DIMMA2, then DIMMB1,
DIMMA1. For the system to work properly,
please use memory modules of the same
type and speed on the motherboard.
2. Push the release tabs outwards on both
ends of the DIMM slot to unlock it.
3. Align the key of the DIMM module with the
receptive point on the memory slot.
4. Align the notches on both ends of the
module against the receptive points on the
ends of the slot.
5. Use two thumbs together to press the
notches on both ends of the module
straight down into the slot until the module
snaps into place.
6. Press the release tabs to the lock positions
to secure the DIMM module into the slot.
DIMM Removal
Reverse the steps above to remove the DIMM
modules from the motherboard.
Release Tabs
Notches
Press both notches
straight down into
the memory slot.