Supermicro C7C232-CB-ML, Руководство пользователя

Страница: 83 / 107

Chapter 4: BIOS
83
PEG1 Slot Power Limit Scale
Use this feature to select the scale used for the slot power limit value. The options are
1.0x , 0.1x, 0.01x, and 0.001x.
PEG 0:1:2
Enable Root Port
Use this feature to enable or disable the PCI Express Graphics (PEG) device in the port
specified by the user. The options are Disabled, Enabled, and
Auto.
Max Link Speed
Use this item to configure the link speed of a PCI-E port specified by the user. The options
are
Auto
, Gen1, Gen2, and Gen3.
PEG2 Slot Power Limit Value
Use this feature to set the upper limit on the power supplied by the PCIE slot. Press "+"
or "-" on the keyboard to change this value. The default setting is
75 .
PEG2 Slot Power Limit Scale
Use this feature to select the scale used for the slot power limit value. The options are
1.0x , 0.1x, 0.01x, and 0.001x.
PEG0 Max Payload size
Use this feature to select the PEG0 max payload size. The options are Auto , 128TLP, and
256TLP.
Detect Non-Compliance Device
Select Enabled for the AMI BIOS to automatically detect a PCI-E device that is not compliant
with the PCI-E standards. The options are
Disabled and Enabled.
Program PCIe ASPM after OpROM
PCIe ASPM, the Active State Power Management for PCI-Express slots, is a power
management protocol used to manage power consumption of serial-link devices installed on
PCI-Exp slots during a prolonged off-peak time. If this item is set to Enabled, PCI-E ASPM
will be programmed after OPROM. If this item is set to Disabled, the PCI-E ASPM will be
programmed before OPROM. The options are
Disabled
and Enabled.

Memory Configuration
The following memory information will display:
•
Memory RC Version
•
Memory Frequency