Supermicro B2SC2-TF Скачать руководство пользователя | Manualshive

Страница: 91 / 95

background image

Appendix D: UEFI BIOS Recovery

91

Appendix D

UEFI BIOS Recovery

Warning:

Do not upgrade the BIOS unless your system has a BIOS-related issue. Flashing

the wrong BIOS can cause irreparable damage to the system. In no event shall Supermicro
be liable for direct, indirect, special, incidental, or consequential damages arising from a BIOS
update. If you need to update the BIOS, do not shut down or reset the system while the BIOS
is updating. Doing so may cause a boot failure.

D.1 Overview

The  Unified  Extensible  Firmware  Interface  (UEFI)  provides  a  software-based  interface
between  the  operating  system  and  the  platform  firmware  in  the  pre-boot  environment.
The  UEFI  specification  supports  an  architecture-independent  mechanism  for  add-on  card
initialization  to  allow  the  UEFI  OS  loader,  which  is  stored  in  the  add-on  card,  to  boot  the
system. The UEFI offers clean, hands-off control to a computer system at bootup.

D.2 Recovering the UEFI BIOS Image

A UEFI BIOS flash chip consists of a recovery BIOS block and a main BIOS block (a main
BIOS image). The boot block contains critical BIOS codes, including memory detection and
recovery codes for the user to flash a new BIOS image if the original main BIOS image
is corrupted. When the system power is on, the boot block codes execute first. Once it is

completed, the main BIOS code will continue with system initialization and bootup.

Note:

Follow the BIOS recovery instructions below for BIOS recovery when the main

BIOS boot crashes. However, if the BIOS boot block crashes, you will need to follow

the procedures below for BIOS recovery.

D.3 Recovering the BIOS Block with a USB Device

This feature allows the user to recover a BIOS image using a USB-attached device without

the need for additional utilities. A USB flash device such as a USB flash drive or a USB CD/
DVD device can be used for this purpose. A USB hard disk drive cannot be used for BIOS

recovery at this time.

The file system supported by the recovery block is FAT (including FAT12, FAT16, and FAT32),

which is installed on a bootable or non-bootable USB-attached device. However, the BIOS

might need several minutes to locate the SUPER.ROM file if the media size becomes too
large due to the huge volumes of folders and files stored in the device.

«
...
89
90
91
92
93
...
»

Содержание B2SC2-TF
































































































Отзывы:

Нет отзывов

Похожие инструкции для B2SC2-TF

Univerge SV9300

Бренд: NEC Страницы: 26

Бренд: NEC Страницы: 20

DS2000 IntraMail

Бренд: NEC Страницы: 2

Бренд: Hal Communications Страницы: 25

Бренд: Paradyne Страницы: 45

Бренд: SIIG Страницы: 12

HiGain HLU-231 List 8F

Бренд: ADC Страницы: 7

Бренд: Fracarro Страницы: 12

MultiConnect SE MTS2EA

Бренд: Multitech Страницы: 2

Бренд: ROE Страницы: 41

ST62GP-EMU2 HDS2 Series

Бренд: STMicroelectronics Страницы: 58

Бренд: ETAS Страницы: 82

Бренд: Navitar Страницы: 1

Бренд: Xinje Страницы: 76

Бренд: Juniper Страницы: 6

Threat Analysis Reporter TAR HL/SL/MSA

Бренд: 8e6 Technologies Страницы: 22

Бренд: Dell Страницы: 65

Бренд: Extron electronics Страницы: 220

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды