Supermicro A+ AS -2114GT-DNR, Руководство пользователя

Страница: 80 / 126

80
A+ Server AS -2114GT-DNR User's Manual
Flow Control
Use this item to set the flow control for Console Redirection to prevent data loss caused
by buffer overflow. Send a "Stop" signal to stop sending data when the receiving buffer
is full. Send a "Start" signal to start sending data when the receiving buffer is empty. The
options are None , Hardware RTS/CTS, and Software Xon/Xoff.
Data Bits EMS
Parity EMS
Stop Bits EMS

CPU Configuration
SMT Control
Use this setting to disable symmetric multithreading. Options include Disabled and Auto .
Core Performance Boost
This setting is used to configure for Core Performance Boost. Options include Auto and
Disabled.
Global C-state Control
This setting is used to configure for Global C-state Control. Options include Disabled, Enabled,
and Auto .
Local APIC Mode
Options include Compatibility, xAPIC, x2APIC, and Auto .
CCD Control
Sets the number of CCDs to be used. Once this option has been used to remove any CCDs,
a POWER CYCLE is required in order for future selections to take effect. Options inlcude
Auto
, 2 CCDs, 3 CCDs, 4 CCDs, and 6 CCDs.
Core Control
Sets the number of cores to be used. Once this option has been used to remove any CCDs, a
POWER CYCLE is required in order for future selections to take effect. Options inlcude Auto ,
ONE (1+0), TWO (2+0), THREE (3+0), FOUR (4+0), FIVE (5+0), SIX (6+0), and SEVEN (7+0).
L1 Stream HW Prefetcher / L2 Stream HW Prefetcher
This setting is used to enable or disable the L1/L2 Stream Hardware Prefetcher. The options
are Disabled, Enabled, and
Auto .