10
A+ Server AS -1014S-WTRT User's Manual
Control Panel Features
Item
Feature
Description
1
UID Button
Depressing the UID (unit identifier) button illuminates an LED on both
the front and rear of the chassis for easy system location in large stack
configurations. The LED will remain on until the button is pushed a
second time.
2
Information LED
See table below for details.
3
NIC2 LED
Indicates network activity on LAN port 2 when flashing
4
NIC1 LED
Indicates network activity on LAN port 1 when flashing
5
HDD LED
Indicates activity on a hard drive when flashing.
6
Power LED
Indicates power is being supplied to the system power supply. This
LED should normally be illuminated when the system is operating.
7
Reset Button
The reset button is used to reboot the system
8
Power Button
The main power button is used to apply or remove power from the
power supply to the server. Turning off system power with this button
removes the main power but maintains standby power. To perform
many maintenance tasks, you must also unplug system before
servicing
Figure 1-1. Control Panel View
1.4 Server Chassis Features
Control Panel
The switches and LEDs located on the control panel are described below. See Chapter 4 for
details on the control panel connections.
1
8
7
6
5
4
3
2
Information LED
Status
Description
Continuously on and red
An overheat condition has occurred.
(This may be caused by cable congestion.)
Blinking red (1Hz)
Fan failure, check for an inoperative fan.
Solid blue
UID has been activated locally to locate the
server in a rack environment.
Blinking blue
UID has been activated using IPMI to locate the
server in a rack environment.
