Supermicro 7044H-82, Руководство пользователя

Страница: 40 / 124

5-6
S
UPER
S
ERVER 7044H-82R/7044H-X8R/7044H-82 User's Manual
5-4 I/O Ports
The I/O ports are color coded in conformance with the PC 99 specification.
See Figure 5-3 below for the locations of the various I/O ports.
Figure 5-3. Rear Panel I/O Ports
5-5 Installing Memory
Note: Check the Supermicro web site for recommended memory modules:
http://www.supermicro.com/support/resources/
CAUTION
Exercise extreme care when installing or removing DIMM modules
to prevent any possible damage. Also note that the memory is
interleaved to improve performance (see step 1).
DIMM Installation (See Figures 5-4 and 5-5)
1. Insert the desired number of DIMMs into the memory slots, starting with
Bank 1. The memory scheme is interleaved so you must install two
modules at a time, beginning with DIMM A1 and DIMM B1 (Bank1), and
so on.
2. Insert each DIMM module vertically into its slot. Pay attention to the
notch along the bottom of the module to prevent inserting the DIMM
module incorrectly.
3. Gently press down on the DIMM module until it snaps into place in the
slot. Repeat for all modules (see step 1 above).
*A parallel port is included on the X6DH8-G2 (7044H-82R/7044H-82) only.