Supermicro 7044H-82, Руководство пользователя

Страница: 21 / 124

Chapter 2: Server Installation
2-5
Installing the Chassis Rails
You will need to remove the top cover and the feet to add rack rails to the
chassis. First, remove the top and right covers (top and left covers when standing
as a tower chassis) by first removing the screws that secure them to the chassis.
Depress the button on the top (side if tower) of the chassis to release the cover
and then pull the cover off. Then unscrew the four feet and remove them from the
chassis (see Figure 2-2).
You can now attach rack rails to the top and bottom (now the sides) of the
chassis. First add the rack handles. Then position the inner chassis rail
sections you just removed along the side of the chassis making sure the screw
holes line up. Note that these two rails are left/right specific. Screw the rail
securely to the side of the chassis (see Figure 2-3). Repeat this procedure for
the other rail on the other side of the chassis. You will also need to attach the
rail brackets when installing into a telco rack.
Locking Tabs: As mentioned, the chassis rails have a locking tab, which serves
two functions. The first is to lock the server into place when installed and pushed
fully into the rack, which is its normal position. Secondly, these tabs also lock
the server in place when fully extended from the rack. This prevents the server
from coming completely out of the rack when you pull it out for servicing.
Figure 2-2. Preparing to Install the Chassis Rails