System 5130AD-T User's Manual
32
2. Locate and press the release tab (Figure 6-5) for the drive tray in which you want to
place the drive.
3. Push the drive tray toward the front of the chassis and out.
4. Secure the storage drive to the drive tray with screws through the bottom of the tray. To
install two 2.5" drives, use the optional bracket (P/N MCP-220-00044-0N) as shown.
5. Slide the drive tray into the chassis until it clicks into place.
Installing Disk Drives into the Cage
You can install up to four 2.5" drives into the dedicated center cage. You can also install three
drives into each of the upper and lower combination cages.
Figure 3-5. Installing Drives and Mounting Brackets in to the Cage
1. Open the chassis left side cover.
2. Remove the drive mounting bracket from the cage. Pinch the tabs and pull out.
3. Secure the drive into the mounting bracket.
•
For 2.5" drives in the dedicated bays (center cage), fl ex the drive bracket and drop the
drive in with the connector side facing into the chassis.
•
For 3.5" drives in the combo bays (top or bottom cages), fl ex the drive bracket and drop
the drive in with the connector side facing into the chassis.
•
For 2.5" drives in the combo bays, use screws through the bottom of the bracket to secure
the drive with the connector side facing into the chassis.
