Supermicro 5025M-4, Руководство пользователя

Страница: 43 / 120

Chapter 5: Advanced Motherboard Setup
5-7
Thermal Grease
Heatsink Fins
Installing the Heatsink
1. Locate the "FAN5" header on the
motherboard.
2. Position the heatsink in such a way
that the heatsink fan wires are closely
routed to the CPU fan and do not inter-
fere with other components.
3. Inspect the CPU fan wires to make
sure that the wires are routed through
the bottom of the heatsink.
4. Remove the thin layer of the protec-
tive fi lm from the copper core of the
heatsink. Warning: the CPU may
overheat if the protective fi lm is not
removed from the heatsink.
5. Apply the proper amount of thermal
grease on the CPU. (If your heatsink
came with a thermal pad, please ignore
this step.)
6. If necessary, rearrange the wires
so that they are not pinched between
the heatsink and the CPU. Also make
sure there is clearance between the fan
wires and the fi ns of the heatsink.
7. Align the four heatsink fasteners
with the mounting holes on the moth-
erboard. Gently push diagonal pairs
of fasteners (#1 & #2 and #3 & #4)
into the mounting holes until you hear
a click. Orient each fastener so that
the narrow end of the groove points
outward.
#2
#3
#4
#1
Narrow end of the groove
points outward
Step 5
Step 6
Step 7
Note: not all steps are pictured.