Supermicro 5025M-4, Руководство пользователя

Страница: 19 / 120

Chapter 2: Server Installation
2-1
Chapter 2
Server Installation
2-1 Overview
This chapter provides a quick setup checklist to get your SuperServer 5025M-
4/5025M-i up and running. Following these steps in the order given should enable
you to have the system operational within a minimum amount of time. This quick
setup assumes that your SuperServer 5025M-4/5025M-i system has come to you
with the processors and memory preinstalled. If your system is not already fully
integrated with a motherboard, processors, system memory etc., please turn to
the chapter or section noted in each step for details on installing specifi c compo-
nents.
2-2 Unpacking the System
You should inspect the box the SuperServer 5025M-4/5025M-i was shipped in and
note if it was damaged in any way. If the server itself shows damage you should
fi le a damage claim with the carrier who delivered it.
Decide on a suitable location for the rack unit that will hold the SuperServer 5025M-
4/5025M-i. It should be situated in a clean, dust-free area that is well ventilated.
Avoid areas where heat, electrical noise and electromagnetic fi elds are generated.
You will also need it placed near a grounded power outlet. Read the Rack and
Server Precautions in the next section.
2-3 Preparing for Setup
The box the SuperServer 5025M-4/5025M-i was shipped in should include two
sets of rail assemblies, two rail mounting brackets and the mounting screws you
will need to install the system into the rack. Follow the steps in the order given to
complete the installation process in a minimum amount of time. Please read this
section in its entirety before you begin the installation procedure outlined in the
sections that follow.