Supermicro 4048B-TR4FT, Руководство пользователя

Страница: 60 / 136

5-10
SUPERSERVER 4048B-TR4FT USER'S MANUAL
5-5 Installing Memory
Caution:
exercise extreme care when installing or removing DIMMs to prevent any
possible damage. DIMMs should be installed with the memory card removed from the
baseboard. See the tables on page 5-12 for details on populating memory.
Installing Memory
Insert the desired number of DIMMs into the slots on a memory card in the order
shown in Figure 5-4. For best performance, use the memory modules of the same
type and speed.
1. Push the release tabs outwards on both ends of the DIMM slot to unlock it.
2. Align the key of the DIMM module with the receptive point on the memory
slot.
3. Press both ends of the module straight down into the slot until the module
snaps into place.
4. Press the release tabs to the locking positions to secure the DIMM module
into the slot.
5. Reverse the steps above to remove DIMM modules.
Memory Support
With all eight cards fully populated, the system will support up to a total of 12 TB of
DDR4-1866/1600/1333/1066 ECC RDIMM/LRDIMM memory. Check the Supermicro
website (
www.supermicro.com ) for the latest memory support information.
Figure 5-4. X10QBi-MEM2 Memory Card Layout
X10QBi-MEM2
PRESENT_LED1
DIMM2A_LED3
DIMM1A_LED2
DIMM0A_LED1
DIMM2B_LED6
DIMM1B_LED5
DIMM0B_LED4
DIMM2C_LED1 DIMM1C_LED8 DIMM0C_LED7 DIMM2D_LED4 DIMM1D_LED3 DIMM0D_LED2
BAR CODE
A3
D1 D2 C1 C2 C3 D3
OK
B1 B2 B3 A1 A2
JDI
JDI
DIMMC3
DIMMA1
DIMMA2
DIMMA3
DIMMB3
DIMMB2
DIMMB1
Rev. 1.01
DIMMC2
DIMMC1
DIMMD3
DIMMD2
DIMMD1
DIMM C3
DIMM C2
DIMM C1
DIMM D3
DIMM D2
DIMM D1
DIMM A3
DIMM A2
DIMM A1
DIMM B3
DIMM B2
DIMM B1
PRESENT LEDs
Notes : When installing a DIMM module, be sure to press the module straight down
into the slot until it is properly seated and its PRESENT LED (as shown above)
turns on.