Introduction
Welcome to the
SuperLogics
ADC-1R2
Series
of I/O modules. These modules
using RS-232 communications are available in different configurations dependent on your
needs and applications. In addition they are offered in an enclosure, or open allowing you
the end user complete flexibility when determining the parameters for your project.
In addition
SuperLogics
offers a full line of peripheral attachment boards for
analog signal conditioning and digital I/O interface. These boards conveniently plug into
the main unit for ease of installation. See page 24.
Configurations for 232M200 models with enclosure are:
ADC-1R2-DIO
16 digital I/O
ADC-1R2
16 digital I/O and 8 channels A/D conversion
ADC-1R2-AOT
16 digital I/O and 8 channels A/D conversion
and 2 channels D/A conversion
I/O Module features:
MPU: Microchip PIC16C65B
EEPROM: Microchip 25C040
MPU Clock: 14.7456 Mhz
Interface: RS-232 (single ended)
Baud: 9600, 19200, 57600, 115200 (DIP switch selectable)
LED: Bicolor diagnostic LED
Watchdog: MPU has built-in watchdog timer
POR: MPU contains timed Power On Reset circuitry
Brownout: MPU brownout detection ciruictry built-in
Temperature: 0° to 70°C (32° to 158°F)
Commercial Temperature Range
-40° to 85°C (40° to 185°F)
Industrial Temperature Range
PCB: FR4
Power: 7.5Vdc to 15.0 Vdc (approx. 50 ma nominal power)
Peripherals See the plug in peripheral section on page 24.
ADC-1R2
Series Features
•
16 Digital I/O lines
•
8 12 bit Analog Inputs
•
2 12 bit Analog Outputs
•
PWM Output
•
32 bit Pulse Counter 1 Mhz
RS-232
Full duplex
50’ max.
ADC-1R2
12 bit analog
acquisition
digital I/O lines
