Your First Command
Now that you have a EZTerminal session running, your ready to power up the
ADC-1R2
Series
I/O Module. After powering up your
ADC-1R2
Series
Module, EZTerminal will
receive a welcome message from the unit indicating you are ready to provide your first
command.
RS-232 Firmware Version 3.1 Command:
•
Typethe letter
V
and the
Enter Key
•
You should see V30 on the screen
•
NOTE:
Make sure to type
CAPITAL V
,
not lowercase v!
After your first command, see
Commands and Responses
section for more commands.
Screenshots and setup instructions performed running EZTerminal on a PC installed with
Microsoft® Windows® XP Operating System.
Step 3
Step 4
Step 4
Step 2
