www.SuperiorFireplaces.US.com
126803-01A
19
INSTALLATION
Continued
4. Find the charred log (D-020). See Figures
25, 25A, and 25B. The log has a slot in the
bottom that fits over the square grate and
rests against the burner tube as shown in
Figure 25. Place this log on the base as
shown in figures.
Figure 24B - Installing Front Left Log
Grate Finger
Log Slot
Charred
Log
Log Notch
Right Front Log
Figure 25 - Installing Charred Log
Figure 25A - Installing Charred Log Top
View
Figure 25B - Installing Charred Log Top
Side View
Square Grate
Log Notch
5.
Find the middle split log (VFGT24 inch
models: D-063 or VFGT30 inch models:
D-021 or VTGF36 inch models: D-028).
See Figures 26 and 26A. The split side
of the log faces forward. The log has a
notch that fits around the burner tube on
the right side. The left side of the burner
tube fits into the notch on the back side of
this log. The log is placed properly when
it sits parallel to the tube burner and the
square peg is pointing up. See figures
for reference.
Figure 26 - Installing Middle Split Log
(D-021)
Middle Split Log (D-063,
D-021 or D028)
Square Peg
Figure 26A - Installing Middle Split Log
Rear Top Side View
Log Notch
Burner Tube
