Superior DRI3030TENC, Инструкция по установке и эксплуатации

Страница: 18 / 38

18
NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.
Figure 11 - Panel Install: Bracket Removal
Figure 12 - Panel Installation
Figure 13 - Panels Installed
1 - PANEL INSTALL: BRACKET REMOVAL 2 - PANEL INSTALLATION
3 - PANELS INSTALLED
MEDIA
1 - PANEL INSTALL: BRACKET REMOVAL
2 - PANEL INSTALLATION
3 - PANELS INSTALLED
MEDIA
1 - PANEL INSTALL: BRACKET REMOVAL
2 - PANEL INSTALLATION
3 - PANELS INSTALLED
MEDIA
Firebox Liner Kit Installation Instructions:
1. Remove the glass door following the instructions provided in this
manual.
2. Remove the two brackets from the firebox using a 5/32" allen wrench
(see Figure 11 ) . Retain the screws for step 4, and discard the brackets
as they will not be needed.
3. Install the rear liner panel by inserting the tabs on the bottom of each
end into the slots on the rear burner-retaining tray (see Figure 12 ) .
4. Install one side liner panel by inserting the tab (located on the bottom
edge near the back) into the same slot as one side of the rear liner
panel (see Figure 12 ) . Fasten in place using one screw from the
brackets removed in step 2. Repeat for the other side liner panel.
NOTE: The side panels overlap on top of the back panel.
Figure 9
SCALE 0.500
DETAIL B
See Detail B
Detail B
Figure 10