NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.
2
THE FIREPLACE
INTRODUCTION
The WRT4826WH wood-burning fireplace is
an energy efficient, heat circulating, closed
combustion fireplace. You will receive a lifetime
of comfort and enjoyment from your fireplace
provided it is installed, maintained and oper-
ated properly.
•
Please read these instructions and retain
this manual for future reference.
•
Before beginning the fireplace installation,
consult the appropriate local authorities to
obtain your building permit and check your
local building codes. Install the fireplace
only as described in these instructions and
using only IHP components.
• This fireplace has been tested for CAN/ULC
S610-M87 and ANSI/UL 127. It has also
been tested for EPA 40 C.F.R Part 60, section
60.532(b).
•
The WRT4826WH fireplace is not intended
for use with a gas log set. Do not use a
fireplace insert or any other product with
this fireplace unless it is specified by IHP
for use with this appliance. Failure to follow
these instructions will void the certification
and the warranty of the fireplace and may
result in an unsafe installation.
• These appliances are designed to provide
supplemental heat to the immediate area only.
Therefore, it is advisable to have an alternate
heat source when installed in a dwelling.
• These appliances are not approved for
Manufactured Home installations.
CAUTION: BURN UNTREATED WOOD
ONLY. OTHER MATERIALS SUCH AS
WOOD PRESERVATIVES, METAL FOILS,
COAL, PLASTIC, GARBAGE, SULPHUR OR
OIL MAY DAMAGE THE CATALYST.
CAUTION: DO NOT OPERATE WITHOUT
THE CATALYTIC COMBUSTOR IN PLACE.
CAUTION: NEVER BURN WITH THE BY-
PASS OPENED EXCEPT FOR FIRE START-
UP AND WHEN RELOADING THE STOVE.
CONGRATULATIONS!
When you purchased your new fireplace, you joined the ranks of thousands of individuals
whose answer to their home heating needs reflects their concern for aesthetics, efficiency
and our environment. We extend our continued support to help you achieve the maximum
benefit and enjoyment available from your new fireplace.
Thank you for selecting a IHP fireplace as the answer to your home supplemental heat-
ing needs.
PARTS REQUIRED
Fireplace model: WRT4826WH
•
Louver set
(See options on
Page 22
)
•
7” diameter chimney - United States
Model IHP Snap-Pak, including:
- Chimney lengths
- Elbows (where necessary)
- Associated components as per these
installation instructions and vent
manufacturer’s instructions.
•
7” diameter chimney - Canada
Models ASHT
®
& S2100 manufacture by
Security Chimneys
®
or DuraTech Canada
(DTC) manufactured by DuraVent only,
including:
- Chimney lengths
- Elbows (where necessary)
- Associated components as per these
installation instructions and vent
manufacturer’s instructions.
•
Outside air kit (included)
Additional Equipment (optional)
•
Forced Air Kit
•
Heatflow Convection Kit
•
Fireplace Blower Kit, UZY5
TABLE OF CONTENTS
The Fireplace ...................................... Page 2
Introduction ....................................... Page 2
Parts Required .................................. Page 2
Additional Equipment (Optional) ........ Page 2
Safety Rules ....................................... Page 3
Operating The Fireplace ..................... Page 4
Fuel .................................................... Page 4
Catalytic Combustor ........................... Page 4
Combustion Control .......................... Page 4
Starting And Maintaining A Fire ......... Page 5
Refuelling For Best Performance ....... Page 5
Smoking – Causes And
Troubleshooting ............................... Page 6
Important Cautions ............................ Page 6
Dealing With A Chimney Fire .............. Page 6
Maintaining Your
Fireplace .......................................... Page 7
Creosote ............................................. Page 7
Chimney Maintenance ........................ Page 7
Catalytic Combustor ........................... Page 7
Refractory Rep lacement .................... Page 10
Door Frame Care ................................ Page 10
Ashes ................................................. Page 10
Door Installation ................................ Page 11
Door Adjustment ................................ Page 11
Glass Care - Replacement .................. Page 11
Glass Care - Cleaning ......................... Page 11
Gasket Replacement ......................... Page 11
FIREPLACE INSTALLATION ............... Page 11
Locating The Fireplace ....................... Page 11
Framing, Facing And Mantel ............... Page 12
Hearth Extension Requirements ........ Page 12
Cold Climate Installations ................... Page 12
Fireplace / Framing Dimensions ......... Page 13
Insulated Chase Construction ............ Page 14
Nailing Flanges ................................... Page 14
Facing / Mantel .................................. Page 15
Outside Air Kit ................................... Page 16
Draft Requirements ............................ Page 16
Heatflow Convection Kit Installation ... Page 17
Chimney System ................................ Page 20
Chimney Installation Instructions
Using IHP Snap Pak (USA) ............. Page 21
Chimney Installation Instructions
Using Security ASHT (Canada) ....... Page 25
Chimney Chase And
Multiple Terminations....................... Page 25
Masonry Applications ........................ Page 26
Installation Accessories ..................... Page 27
Replacement Parts ............................. Page 28
Specifications ..................................... Page 28
Clearance To Combustible ................. Page 28
Security Chimney Components Lists ..... Page 29
Safety/Listing Label ...........................Page 30
Warranty ............................................ Page 31
Product Reference Information .......... Page 32
