Operation
900966-00B, 04/2019
Innovative Hearth Products
DRT3000-C Series Direct-Vent Gas Fireplaces
62
4. Place the Bottom Left Log (2) on to the left floor tab (a). (Figures 55 and 57).
5. Place the Middle Ember Log (3) on to the two small tabs (c & d) on the burner with the small side pointing to the left. (Figure 58).
Installing the DRT3000-C 45 Series Log Set (continued)
Figure 59 - Back Right Log (4)
Figure 60 - Place Left Twig Log (5)
Figure 61 - Place Middle Twig Log (6)
Bottom View
Figure 57 - Place Bottom Left Log (2)
Figure 58 - Place Middle Ember Log (3)
Bottom View
1
2
Fits over Tab “a”
(Figure 55)
6. Place the “Y” end of the Right Twig Log (4) on to the grate shown and the other end will lay on to the landing groove (Figure 58) on the right
side of the Rear Log (1) (Figure 59).
7. Place the Left Twig Log (5) with the pin hole on to the Bottom Left Log (2) pin (Figure 57) and place the small end against the left side of
the grate as shown (Figure 60).
Place against left side
of 2nd grate tine
8. Place the “Y” end of the Middle Twig Log (6) on to the middle grate
and the pin hole on to the pin (Figure 59) on the left side of the Rear
Log (1) (Figure 61).
Fits over Pin on Log (2) (Figure 59)
3
1
Bottom View
Fits over Tab “c”
(Figure 55)
Fits over Tab “d”
(Figure 55)
Landing for
Log (4)
1
4
2
3
Pin for Log (5)
Log (4) straddles
this grate tine
Pin for Log (6)
5
1
2
4
3
Place log (5) against
left side this grate
Bottom View
Fits over Pin on Log (1) (Figure 59)
1
2
4
3
6
Log (6) straddles
this grate tine