Operation
900966-00B, 04/2019
Innovative Hearth Products
DRT3000-C Series Direct-Vent Gas Fireplaces
60
4. Place the bottom left log (2) on to the left floor tab (a) (Figures 47 and 49).
5. Place the Middle Ember Log(3) on to the two small tabs (c & d) on the burner with the small side pointing to the left (Figure 50).
Installing the DRT3000-C 40 Series Log Set (continued)
Figure 51 - Back Right Log (4)
Figure 52 - Place Left Twig Log (5)
Figure 53 - Place Middle Twig Log (6)
Bottom View
Bottom View
1
4
2
3
5
1
2
4
3
Figure 49 - Place Bottom Left Log (2)
Figure 50 - Place Middle Ember Log (3)
Bottom View
Bottom View
1
2
3
1
2
Fits over Tab “a”
(Figure 47)
Fits over Tab “c”
(Figure 47)
Fits over Tab “d”
(Figure 47)
6. Place the “Y” end of the Right Twig Log (4) on to the grate shown and the other end will lay on to the landing groove (Figure 50) on the right
side of the Rear Log (1) (Figure 51).
7. Place the Left Twig Log (5) over the pin hole on to the Bottom Left Log (2) pin (Figure 51) and place the small end against the left side of the
grate shown (Figure 52).
Landing for
Log (4)
Pin for Log (5)
Place against left side
of 2nd grate tine
Place log (5) against
left side this grate
Log (4) straddles
this grate tine
8. Place the “Y” end of the Middle Twig Log (6) on to the middle grate
and the pin hole over to the pin (Figure 51) on the left side of the
Rear Log (1)(Figure 53).
1
2
4
3
6
Log (6) straddles
this grate tine
Pin for Log (6)
Fits over Pin on Log (2) (Figure 51)
Fits over Pin on Log (1) (Figure 51)
