Superchips ARCHOS43 Скачать руководство пользователя

Страница: 3 / 36

INSTALLATION & OPERATION WARNINGS

When installing the VIVID LINQ and Android

tablet units in the vehicle, securely

place the device so it does not obstruct the driver’s view of the road or interfere with

vehicle operating controls, such as the steering wheel, foot pedals, or transmission

levers. Do not place the Android tablet or VIVID LINQ in front of any airbag.

*Avoid cable routing that can interfere with pedal operation.

The windshield mount may not stay attached to the windshield in all circumstances.

Do not place the mount where it will become a distraction if the mount should become

detached. Keep your windshield clean to help ensure that the mount stays on the

windshield.

WARNING Misapplication or misuse of this product could lead to a serious

or fatal accident. Comply with all safety information in this manual, and your

vehicle owner’s manual. Follow safety, installation and operating instructions in

this User Manual to assure proper use.

PRODUCT HANDLING

Please observe all operating conditions relating to the Superchips VIVID.

This product is designed for normal room temperatures or temperatures suitable for

humans.

Please remove the product from the vehicle when not in use.

Do not leave the ARCHOS

tablet on the dashboard or windshield when not in use.

If exposed to extreme temperature, the unit could become damaged. Remove

the Android tablet from the vehicle if it falls within the following scenarios:

(1) Vehicle interior is subjected to 140˚ F or higher.

(2) Vehicle interior is subjected to 32˚ F or lower.

Do not “stack” Superchips VIVID tuning with other unauthorized tuning products.

“Stacking” performance-enhancing devices or other improper installation can cause

power train failure on the road. Other products may have features incompatible with

your VIVID device. Follow all installation and operating instructions, and do not stack

products.

Unit is sealed and is not to be serviced by user.

Unit can be damaged by violent impact.

If the vehicle will be sitting for long periods of time without being started, disconnect

the VIVID LINQ from the vehicles data port to prevent voltage draw from the battery.

NOTE: Dispose of this product consistent with local city and state codes. Return

to your electronics supplier for proper handling.

Содержание ARCHOS43





































Результаты поиска

Содержание ARCHOS43

Отзывы:

Похожие инструкции для ARCHOS43

Бренды по названию

Популярные бренды

Superchips ARCHOS43, Руководство пользователя

Результаты поиска

Содержание ARCHOS43

Отзывы:

Похожие инструкции для ARCHOS43

Бренды по названию

Популярные бренды