background image

SBB00104-4-0512

Page 16

PROPANE GAS GRILLS

Grill Location

When choosing the ideal location for your Superb by Broilmaster

®

 

Gas Grill, remember this grill is designed for outdoor use ONLY.
You should never install or operate your grill in any building, 

garage, or other enclosed area.
For your safety, this grill should not be installed or operated under 

any combustible materials, such as carports, covered porches, 

awnings, or overhangs.
Never install or operate your grill in or on any recreational vehicle 

or boat.

CAUTION:  The installation and operation of this grill at 

clearances less than specified below may lead to the possibility 

of fire, property damage, or personal injury.

Some examples of combustible materials are a wall, a fence, patio 

furniture, or the wall of your home.
The area surrounding the grill should be clear to ensure proper 

ventilation. Do not obstruct the flow of combustion and ventilation 

air in any way. The ventilation openings on the propane cylinder 

enclosure must also remain free and clear of debris.
Portable grills should be level and positioned away from direct 

wind prior to each use.

WARNING:  Do not install or operate this grill where gaso-

line or other flammable materials are used or stored. Failure 

to comply with this warning could result in explosion or fire 

causing property damage or personal injury.

Gas Type

Never use Liquid Propane (LP) gas with a grill designed for Natural 

gas, or Natural gas with a grill designed for Liquid Propane gas. 

The type of gas required for your grill can be determined from the 

product identification label located on the grill’s right side panel 

of the cart. Questions regarding different types of gases should be 

directed to your gas supplier.

Cylinder Requirements

Your Superb by Broilmaster

®

 Gas Grill requires a standard twenty 

(20) pound propane gas cylinder.

The maximum height allowable for a replacement cylinder is ap-

proximately twelve (12”) inches (30.5 centimeters).

The propane gas cylinder must be:

1.  Constructed and marked in accordance with the specifications 

for LP gas cylinder of the U.S. Department of Transportation 

(D.O.T.) or the National Standard of Canada, CAN/CSA-B339, 

Cylinders, Spheres, and Tubes for Transportation of Dangerous 

Goods; and Commission as applicable.

2.  Provided with a listed overfilling protection device (OPD).

3.  Provided with a listed safety device having direct access with 

the vapor space of the cylinder and the cylinder supply system 

must be arranged for vapor removal.

4.  Provided with a shutoff valve terminating in a valve outlet as 

specified in the Standard for Compressed Gas Cylinder Outlet 

and Inlet Connections, ANSI CGA-V-1.

5.  Provided with a plug to effectively seal off the cylinder outlet 

when the cylinder is being stored or transported.

6.  Provided with a collar to protect the cylinder valve.

Caution: Do not use a propane gas cylinder which has a ca-

pacity greater than twenty (20) pounds with this grill and side 

burner.
Propane Cylinder Safety

Liquid Propane (LP has a long history of safe use when the safety 

precautions provided in this manual are followed.

Failure to follow these safety precautions could result in a fire 

or explosion causing property damage or personal injury.

Propane gas cylinders should always be handled, stored, and trans-

ported with extreme caution in a secured upright position.
Never attempt to use or repair a propane gas cylinder that has been 

damaged. Never attempt to use or repair a cylinder with a faulty or 

damaged valve outlet. A cylinder that has been dropped, dented, or 

otherwise damaged must be replaced.
A propane gas cylinder should never be transported in the passenger 

area of a vehicle.
Keep cylinders out of direct sunlight and never apply any other 

source of direct heat to them.

When refilling your cylinder, always insist on a reputable, quali

-

fied gas dealer. Your propane gas cylinder is filled by weight, and 

should never exceed eighty (80%) percent of its weight limit. If 

the cylinder is not completely empty, the gas dealer must make 

necessary adjustments to ensure it is not overfilled. Never use an 

overfilled Propane gas cylinder.

Cylinder Storage

Your grill must be stored outdoors in a well ventilated area if the 

cylinder is attached to it.
Disconnected cylinders must have a threaded valve plug tightly 

installed and must not be stored in any building, garage, or other 

enclosed area.

Flammable materials (gasoline, grill covers, etc.) must not be stored 

in the cylinder enclosure.
Always store Propane cylinders in a secured upright position, out 

of reach of children.

Connection Requirements
Caution: Never use Liquid Propane (LP) gas in a grill designed 

for Natural gas, or Natural gas in a grill designed for Liquid 

Propane gas. Questions regarding different types of gases 

should be directed to your local gas supplier.

Содержание SBB2804-1

























Отзывы: