SBB00104-4-0512
Page 14
1. Turn the burner control knobs clockwise to the OFF
position.
2. Turn ON gas at the source.
3. Open the grill lid.
4. Locate the Ignitor Rod, which is permanently attached to the
inside of the right surround side.
5. Insert an unlit match into the coiled end of the ignitor rod.
Light the match.
6. Insert the ignitor rod through the right hole located on the
flame tamers of the grill. Position the match near the front
corner of the burner.
See Figure 14.
7. Turn the left burner control knob counterclockwise to HI.
8. If the burner fails to light after 5 seconds, turn the burner control
knob OFF for five minutes then repeat the procedure.
9. If the burner continues not to light, turn OFF all gas and refer
to the troubleshooting section of your grill Owner’s Manual.
Figure 14
ALTERNATE MATCH LIGHTING
