6Superabrasive
User Manual Original Language
Lavina® 20GE
7/2020
29
8.2 CHECKING AND CHANGING OIL
Check the engine oil level, screw the dipstick in to get reading. While changing engine oil, check for leakage of engine oil at the
various seals.
Do not exceed the 50‐hour oil change interval. Oil changes more frequent than 25 hours will give even longer engine In any case,
always use 30HD or 10W30 engine oil
with all of the following ratings: SF, SG,
and CC. make sure the oil level is
maintained at the "FULL" level.
8.3
DISMOUNTING/MOUNTING
THE GUARD
You can dismount and mount the safe
guard without separating the carriage
from the main head. Put the machine in position to change the tools. Unscrew the four bolts M5 from the metal cover preventing
the safe guard to fall. Dismount one of the three holders. Dismount the safe guard.
8.4 SEPARATING THE
HEAD FROM THE
CARRIAGE
Please note that the propane
cylinder has to be removed and
stored outside before any
maintenance or reparation is done.
1. Disconnect the flexible hose
supplying water under the cover of
the machine/Fig. 8.4.1/. All water
connections in the machines are
with fittings types„Push-In “and
„Release button”.
2. Unscrew the two bolts and nuts to disconnect the vacuum connector from the carriage. /Fig. 8.4.2/.
3. Disconnect the cable of the battery/Fig. 8.4.3/.
4. Remove the lamp /on magnetic attachment/ and disconnect the cable /Fig. 8.4.4/.
Figure 8.2.2
Figure 8.2.1
Figure 8.3
Figure 8.4
Figure 8.4.1
Figure 8.4.2
Figure 8.4.3
Figure 8.4.4
