6Superabrasive
User Manual Original Language
Lavina® 20GE
7/2020
20
4.3 WATER FLOW CONTROL SYSTEM
The operator can direct water to be sprayed in front of the machine (Fig.4.1) by positioning the lever in the horizontal
position (Fig.4.2). Water will spray under the cover of the machine when the lever is in the vertical position (Fig.4.2).
The pressure regulator is located above the lever (Fig.4.3) and controls the water pressure in the system. You can see
the whole water flow control system - main and filtering parts in fig4.4. Fig. 4.5 and fig. 4.6 shows how to remove and
clean the filter mesh. In the instances where more water is required to spray under the cover of the machine, the
orifice plate (shown on pos.8 of table 8 in „spare pats“ ) can be removed.
ALWAYS USE CLEAN WATER TO PROTECT THE SYSTEM FROM DIRT.
Figure 4.2
Figure 4.1
Figure 4.3
Figure 4.4
Figure 4.5
