Superabrasive Lavina 21 Series, Руководство пользователя, Страница: 7 / 34

Superabrasive Owner’s Manual – Lavina 21 1/2013
7
OPERATOR

The Lavina 21 machine.

The operator must know the machine’s work environment.

Only one operator at a time can work with the machine.

The operator must be properly trained and well instructed
prior operating the machine.

The operator must understand all the instructions in this
manual.

The operator must understand and interpret all the drawings
and designs in manual.

The operator must know all sanitation and safety regulations
pertaining to the operation of

The operator must have floor grinding experience.

The operator must know what to do in case of emergency.

The operator must have an adequate technical knowledge
and preparation.
3. HANDLING AND TRANSPORTATION
ADJUSTING THE COLUMN ANGLE
You can adjust the angle of the column for several purposes for transporting or flipping the machine for tool change,
putting the column straight makes it easier to work in narrow places (Fig. 3.1, Fig. 3.2).
Figure 3.1 Figure 3.2
To adjust the column, turn the blocking lever and flip the column (Fig. 3.3, Fig. 3.4).
Figure 3.3
Figure 3.4
ADJUSTING THE HANDLE
The Handle on the frame is adjustable in height and allows the operator to work in a correct and safe posture. Turn the
handle in the upright position to change the tools (Fig. 3.5, Fig. 3.6, and Fig. 3.7).
Figure 3.5 Figure 3.6 Figure 3.7