Superabrasive Lavina 21 Series, Руководство пользователя, Страница: 21 / 34

Superabrasive Owner’s Manual – Lavina 21 1/2013
21
9.A.4 REPLACING OF SHAFT SEAL
Turn off the machine and unplug from electricity
Figure 9.A.4.1
Figure 9.A.4.2
Figure 9.A.4.3
Pull the vacuums ((Fig. 9.A.4.1) and the water hose (Fig. 9.A.4.2)
Place the machine in a position for changing the tools (Fig. 9.A.4.3)
Figure 9.A.4.4 Figure 9.A.4.5 Figure 9.A.4.6
Dismount the tools and the tool holders (Fig. 9.A.4.4)
Unplug the cable from the socket situated under the tank (Fig. 9.A.4.5)
Pull out the two pins (Fig. 9.A.4.6)
Separate the carriage from the main head (Fig. 9.A.4.6)
Figure 9.A.4.7 Figure 9.A.4.8 Figure 9.A.4.9
Dismount the guard (Fig. 9.A.4.7 Dismount the top cover (Fig. 9.A.4.8)
Remove the cover pulling it over the motor (Fig. 9.A.4.9)
Turn the Main head of the machine on the cover of the motor
Figure 9.A.4.10 Figure 9.A.4.11 Figure 9.A.4.12