Super Products Camel 1200 (Dump Body), Руководство оператора

Страница: 88 / 158

3-16 Publication: 0028607
CONTROL SYSTEM OPERATION
3
Pendant Jacks
There is a receptacle for the wired pendant located at the
front panel (1) and at the curbside panel (2).
Figure 3-26
Figure 3-27
Wireless Pendant (Option)
The functions, buttons, and labels on the wireless
pendant are the same as the ones used on the wired
pendant.
NOTE
The wireless pendant power switch must be turned to
the off position when not in use to conserve battery
power.
Vacuum Speed Control from Remotes
Increases and decreases in engine speed (RPM) cause
increases and decreases in vacuum pump speed and
pressure.
Emergency Stop Switch
If an emergency condition arises, press the emergency
stop switch on the remote pendant.
1. The vent door will open, and the remote throttle, hose
reel, boom functions, water pump, and auxiliary
water pumps (trash pump or recycling pump) will be
disabled. The truck engine returns to idle since the
work mode is now disabled.
2. The red EMERGENCY STOP Active error message
will be displayed on the front control panel HMI
screen, and the alarm will sound. The front control
panel alarm can be silenced by pressing the OK
button on the front control panel.
3. To return to full operation, reset the emergency stop
switch on the remote pendant, turn the remote
pendant control switch to the OFF position, rotate the
remote pendant control switch to the SHIFT position,
and release. (This will also silence the front control
panel alarm.)
Front Control Panel Wired Pendant Receptacle
Curbside Control Panel Wired Pendant Receptacle
1
2