Super B NOMIA 12V100Ah, Руководство пользователя

Страница: 11 / 34

11
Be in charge. Super B.
3.5.2. Con 2 (I/O connection 7)
PIN # Range Function
1 max 30 V dc
+ (Plus)
2 0-10 V dc AN_SOC (Analogue state of charge)
3 NA Nc (Not connected)
4
5A max
48V dc max
Rc, (Relay common contact)
5
Rnc, (Relay normaly close contact)
6 Rno, (Relay normaly open contact)
7
GND, (Ground)
Table 9. Con 2 (I/O connection 7)
3.5.3. Con 3 (CANopen; 5-pin “micro” style connector)
PIN # Signal Description
1 CAN_SHLD
Optional CAN Shield
2 CAN_V+
Optional CAN external positive supply
(dedicated for supply of transceiver and
optocouplers. if galvanic isolation of the bus
node applies)
3 CAN_GND
Ground / 0V
4 CAN_H
CAN_H bus line (dominant high)
5 CAN_L CAN_L bus line ( dominant low)
Table 10. Con 3 (CANopen; 5-pin “micro” style connector)
3.6. Peripheral equipment
3.6.1. Obligatory
In order for the Li-ion battery to be used safely, an external disconnect device must be
installed. This should either be a relay or latching relay (bistable) controlled by the battery’s
BMS or a relay or latching relay controlled by a remote switch (CAN controlled). If an
external disconnect device is not installed the warranty of the Li-ion battery will be void. It
will lead to serious damage to the Li-ion battery and can lead to high risks for safety and
environment.