background image

32

12.7 Any liability of Super B for damage suffered by the customer is in any case limited to 
the invoice amount of the relevant products, unless such damage has been caused by gross 
negligence or willful misconduct of Super B. Super B can never be held liable for (a) damage 
caused by any of the circumstances mentioned in clause 11.3, leading to damage to the Super 
B products or to any other device located near those products, or (b) consequential damage, 
including but not limited to loss of profit, loss of production, loss of business interruption, loss 
of product and loss of capacity irrespective of the cause of such consequential loss or (c) 
goodwill.

12.8 To the extent that a court determines that the limitation of liability as meant in clause 
12.7 cannot be invoked against a particular claim for damages by the customer, Super B’s 
liability for loss of property, damage to property, and bodily injury (including death) caused 
by the application of those particular Super B products shall in any event be limited to the 
amount actually paid out by Super B’s insurance company to Super B in accordance with the 
insurance cover of that insurance policy for that particular type of damage. Super B has taken 
out insurance against certain risks, as described in the respective insurance policies. These 
policies contain a usual limitation of insurance payment to be paid out to Super B if, and to the 
extent that, the event is a covered event.

Содержание NOMIA 12V100Ah



































Отзывы: