Temperature recorder and printer
12
In the print menu, if you do not press any button for 30 seconds, the VLTS will
revert automatically to the main measurement display without saving the changes.
Even when printing one channel, the VLTS stores all the channels in memory.
The ^ or v mark in the report indicates reaching the reading limit, regardless of
whether the alarm is on.
Style of Automatic Continuous Real-Time Printing
4 Ch Table
printing prints all 4 channels on a line, as follows:
12:01 123.4C^ 123.4C^ 123.4C^ 123.4C^
T1ABC T2ABC T3ABC T4ABC
Instrumnet123 31/12/21 EVERY 1 MIN
In this printing style, 2 information lines will be shown after every 12 readings lines,
stating: channel names, device name, date and sampling rate.
Printing in the
1 Ch Table
style prints in the small font style. Each line of data
represents one sample and includes the following details: vehicle/site name, channel
symbol, date, time, values and limit mark if reached, as in the following:
Office1 T1 31/12/
21
12:00 123.4C^
In this example, the vehicle/site name is
office1 (see:
“
Renaming for Device
Identification
”
in page 28); the channel symbol is T1; the date is December 31,
2021 (see
“
Setting Time and Date
”
in page 27); the time is 12:00 AM; the
temperature is 123.4ºC
;
and the character ^ indicates reaching the upper limit.
1 Ch graph style
printing style prints one graph channel. The value appears in
each line on the right and is printed on a graph as a dot with a line that connects it
to a dot in the previous line. The defined maximum and minimum limit range are
shown as dashed vertical stripes on either side of the graph. Each 12th line is
printed in the small font style. If the measured value has reached the defined upper
or lower limit, the character ^ or v will appear on the right side of the relevant line.
1 Ch large font
printing style prints one channel in large font. Each sampling in
one line includes the following details: channel symbol, day of the month, time, the
value measured and alert for reaching the upper or lower limit (v\^). For example:
T1 28 23:12 123.4C ^
Printing on-Demand Reports
The VLTS has 4 types of structured reports, ready for printing on demand at any moment.
Press
, select the report type by
/
, and press
for confirmation.
Or scroll through the main menu by
/
, and select the
Print submenu
, then press
to confirm. Select the repot for printing by
/
, and press
for confirmation.
To stop printing the on-demand report at any time
, press
. The printing will stop
with the following text message: THE REPORT STOPPED BY USER.
▲
Print, Delivery ticket
–
printing current reading report from all channels (such report
is generally attached to bills of lading). Press
, select that report by
/
, and
Press
for printing, or press
twice to return to the measurements display.
Device
name
Reading time
Date
Sampling rate,
every 1 minute
The temperature at the 4 channel is
123.4
0
C and has reached the upper
limit (^) regardless of the alarm being
on or at the end of the delay period
Channel
name under
the reading’s
column