ALTIRANDO
LITE
| page 13
Harness User’s manual
| ALTIRANDO
LITE
INSTALLING THE RESERVE PARACHUTE
Riser/Harness connection :
A
B
Attach each riser to the
shoulder attachment points by
making a Lark’s knot ( loop to
loop connection ). Use the larg-
est bridle loop ends.
Fastening the risers to the harness via a Lark’s head knot connection.
We recommend using
“split” risers to guaran-
ty a clean reserve para-
chute deployment.
Fastening the risers to the harness with a set of 6mm square Maillons Rapides®
Assemble everything correctly.
Make sure for the risers not to be
longer than one another.
Tighten each connection securely.
1
2
3
Take two 6mm square
Maillons Rapides® and
two toric elastic rings.
First, open the riser guiding sleeve all the way from top to bottom to access the reserve parachute connec-
tion loops. Once the riser guiding sleeve is fully opened, the zipper tab must be located on the same side of
the reserve parachute pocket.
>> Access to the reserve parachute connection points.
Open the 6mm Mail-
lon Rapide®.
- Push the toric ring
through the Maillon
Rapide® and twist it.
Push the bridle
connecting point
through the toric
ring loop.
- Push the Maillon
Rapide® through the
bridle connection
loop.
1
2
Give the toric ring
a second twist.
- Push the bridle
through the Maillon
Rapide®.
- Make sure the riser
stays in place.
3
Close the Maillon
Rapide® by hand,
then tighten using a
set of pliers and mak-
ing a 1/4 turn.
- Repeat the proce-
dure with the second
bridle connection
loop.
4
