ALTIRANDO
LITE
| page 22
Harness User’s manual
| ALTIRANDO
LITE
CONNECTING THE WING TO THE HARNESS
Without twisting the risers, connect them to the harness attachment loops using the self-locking carabi-
ners.
Check for the risers to be properly positioned and untwisted. The «A» risers must be located at the front
and facing the flight direction (see diagram).
Enfin, vérifiez que les mousquetons soient correctement fermés.
Install the accelerator by following the previous instructions.
Connect it to the wing using the split hooks.
Once the accelerator/speedbar is connected adjust its length
according to the wing recommended measurements.
Installing the accelerator.
Connecting the wing to the harness.
Self-locking
carabiners.
Harness
« A » risers
Flight direction
