Sunx SL-VISA, Инструкция по эксплуатации

Страница: 16 / 16

[Warranty Period]
Unless otherwise agreed, SUNX warrants this product for twelve (12) months from the date of
shipment or delivery to the purchaser’s appointed warehouse.
[Scope of Warranty]
During the above mentioned period, if a failure of the product occurs under normal use and op-
eration, and if SUNX determines that it is responsible for the failure, it shall repair the defect or
replace the product. However, in no event shall SUNX be liable for the failure, damage or loss
stipulated below:
1) Failure caused by instructions, standards, or handling speci ed by the customer
2) Failure caused by modi cations done in the structure, capabilities, speci cations, etc., without
consulting SUNX, after the purchase or the delivery of the product
3) Failure caused by a development which could not be foreseen based upon the technology in
practice at the time of purchase or contract
4) Failure caused by use which deviates from the conditions / environment given in the product
catalog or speci cations
5) In case this product is used by being incorporated in the customer’s machine, failure which
could be avoided if the customer’s machine had functions and structure commonly accepted
in the industry
6) Failure due to Force Majeure
Further, the warranty given here is limited only to this product which has been purchased or deliv-
ered. SUNX shall not be responsible for any consequential damage or loss arising from the failure
of this product.
[Scope of Service]
The cost of the product delivered does not include the cost of despatching an engineer, etc. In
case any such service is needed, it should be requested separately.