Synway Information Engineering Co., Ltd
SMG Series Analog Gateway User Manual (Version 1.5.3)
Page 54
FWD Type
Forward conditions for the FXS port to forward incoming IP calls. The optional
values are:
Option Description
Unconditional
The FXS port will forward all incoming IP calls to the preset
FWD Num
immediately when it receives them.
Busy
The FXS port will forward incoming IP calls to the preset
FWD
Num
if it is busy upon receiving them.
No Reply
The FXS port will forward incoming IP calls to the preset
FWD
Num
if the corresponding station does not answer them in a
designated time period (i.e.
Time for No Reply Forward
). Only
when this forward condition is selected does the configuration
item
Time for No Reply Forward
become valid.
This item is valid only when
Call Forward
is set to
Enable
.
FWD Num
The number to which the incoming IP call is forwarded. If the
Call Forward
feature
is enabled, this item can not be left empty.
Color Ring
Sets whether to enable the color ring feature or not, with the default setting of being
disabled
.
Note:
Only when there are available color rings will appear this item.
Color Ring Index
The index of the color ring which will be quoted by the current FXS port.
Talkback
With this feature enabled and a number bound, the port can talkback to its bound
number. That is, they can start a call with each other as soon as picking up the
phone. The default setting is
disabled
.
Note: This feature is only used in the case of channel registration.
Bound Number
Sets the bound number for talkback.
Ringing Parameter
Sets the ringing parameter for the FXS module. The default value is
RING_F25_75VRMS_0VDC_LPR_SIN
Note: Usually there is no need to modify it; please contact our technicians if
necessary.
Feed Voltage
Parameter
Sets the feed voltage parameter for the FXS module. The default value is
DCFEED_48V_20MA.
Note: Usually there is no need to modify it; please contact our technicians if
necessary.
Impedance
Parameter
Sets the impedance for the FXS module. The default value is
ZSYN_200_680_100_30_0.
Note: Usually there is no need to modify it; please contact our technicians if
necessary.
After configuration, click
Modify
to save the settings into the gateway, click
Reset
to restore the
configurations, or click
Cancel
to cancel the settings.
Or you can click
Batch
to modify several pieces of FXS settings at the same time. See Figure
3-59 below for the FXS batch modification interface. The configuration items on this interface are
the same as those on the FXS modification interface (Figure 3-58).
