Gestures are simple movements of the hand that allow you to control certain functions of the Sunu Band.
The Sunu
Band’s
sensors track the position and movement of your hand to trigger, for example, an
instant sleep or rapid ON/OFF of the Sunu Band. Gestures are intended to help in situations where you
may have your hands occupied and pressing a button is a bit cumbersome.
Your Sunu Band comes with two active gesture controls that enable you to quickly put to sleep and wake
up the Obstacle Detection App. This is especially useful when you are traveling, and a situation arises
where you
don’t
need the Sunu
Band’s
Obstacle Detection App providing feedback. Gestures allow you to
quickly send the Band to sleep and wake it up again. Here is how we do it.
Obstacle Detection SLEEP and WAKE-UP
This gesture only works when you are in the short range or the long range of the Obstacle Detection
App. You should perform the gesture with the hand on which you wear the Sunu Band.
To send Sunu Band to SLEEP:
1.
Tap twice on your hip with your palm facing your hip.
2.
You will feel a long pulse. This pulse begins with a high intensity and decreases to a low intensity. It
indicates that the Obstacle Detection mode is asleep.
To WAKE-UP the Sunu Band:
1.
Tap twice on your hip with your palm facing toward your hip.
2.
The Sunu Band will pulse to indicate whether the short or long range is in use.
There is another way to quickly SLEEP and WAKE-UP your Sunu Band. You can do this by:
1.
Bring your arm to your chest.
2.
Turn your wrist so that your palm is facing downward.
3.
The Obstacle Detection App will quickly SLEEP when your hand is in this position.
To WAKE-UP:
1.
Return your arm to your side.
2.
The Obstacle Detection app will quickly Wake-up.
3.
Sunu Band will continue working in the same sonar mode that was selected prior to sleep.
You can manage, enable, or disable gesture control from within the mobile app. Please refer to the Sunu
App guide for more details.
Resetting Sunu band
Sunu Band can be reset to its factory defaults. To reset Sunu Band:
1.
Press and hold the NAVIGATE button for 3 seconds, unit Sunu Band begins to vibrate.
2.
Allow Sunu Band to go through the reset process. This should only take about 20-30 seconds.
3.
Sunu Band will vibrate again to indicate that’s it’s now reset and that it’s now ready for use.