Suntor ST5XHPT, Руководство пользователя

Страница: 9 / 12

9th
2. Connection
Make the power cable, HDMI Cable, serial port
cable and antenna in good connection.
(the serial port cable is for data links)
3. Power on
After checking all the connections are in good condition, turn on the
the video source, LCD display, transmitter and receiver. The PWR
indicator will bright and the whole system starts work.
4. The status of all indicators during starting
After powering on, the red and green lights will
bright. When the device normally begin work and
the video signal normally transmitting, the red
light will keep bright and green one will blink
continuously. If the video signal not normally
transmitting, the red light also keep bright but the
green light will intermittently blink(About
1-second interval)
Note: If after 3minutes there is still no any video
show on display and the green lights no longer intermittently blink, please check the following
parts
1. Power( changing a new battery and make the power input is DC12V)
2. HDMI Cable Compatibility: If the video is not standard HDMI video stream, the video will not
be recognized by the device. Then you need to change
the camera. At present, Gopro, Sony and other popular
Camera brand have very good compatibility with our
device.
3.
After the receiver powered, the display right bottom
corner will show “Power On” letters.