Doc. Title
ST940 User Manual
Concerning:
Rev.
Date (dd-mm-yy)
Page of Pages
Features and how to configure ST940
1.19
0
19-06-15
15
30 of 51
ReqCircleGeo
● This command is used if the device is required to report to the server all of the geo-fence parameters that are pre-
set.
Field
Marks
Value
Meaning
HDR
“ST910”
Model Name
COMMAND
“ReqCircleGeo”
Report the enabled circular geo-fences
Response consists of continuous field ( 1 or 0 ) and
information about all the geo-fences including the first geo-
fence up to the last one whose last digit is 0.
EV_ID
6 or 9 char.
Digits ID of device. It is a part of IMEI. Please check the
“DEV_ID_TYPE” setting.
<Example>
[command] ST910;ReqCircleGeo;123456789
[command] ST910; ReqCircleGeo
;456789
Case that unit has 3 geo-fences
[response] ST910;RES;ReqCircleGeo;
1
;1;1;+37.127.000000; 2000;1;1;123456789
[response] ST910;RES;ReqCircleGeo;
1
;2;1;+37.127.100000; 2000;1;0;123456789
[response] ST910;RES;ReqCircleGeo;
0
;3;1;+37.127.200000; 2000;1;1;123456789
[response] ST910;RES;ReqCircleGeo;
1
;1;1;+37.127.000000; 2000;1;1;
456789
[response] ST910;RES;ReqCircleGeo;
1
;2;1;+37.127.100000; 2000;1;0;
456789
[response] ST910;RES;ReqCircleGeo;
0
;3;1;+37.127.200000; 2000;1;1;
456789
Case that unit has no geo-fence.
[response] ST910;RES;ReqCircleGeo;NoData;123456789
[response] ST910;RES;ReqCircleGeo;NoData;
456789
InitCircleGeo
● The following table shows how to erase all of the geo-fence parameters.
Field
Marks
Value
Meaning
HDR
“ST910”
Model Name
COMMAND
“InitCircleGeo”
Command Type
DEV_ID
6 or 9 char.
Digits ID of device. It is a part of IMEI. Please