SunTech ST940 Скачать руководство пользователя страница 3

Страница: 3 / 51

Doc. Title

ST940 User Manual

Concerning:

Rev.

Date (dd-mm-yy)

Page of Pages

Features and how to configure ST940

1.19

19-06-15
15

3 of 51

Disclaimer

We, at Suntech, announce that this document and all other related products (i.e. device, firmware, and software) have

been developed by the company, Suntech International Ltd., which is hereinafter referred to as “Suntech”. The

information in this manual is believed to be accurate and reliable at the time of releasing. We, at Suntech, also

assume no responsibility for any damage or loss resulting from the use of this manual, and expressly disclaim any

liability or damages for loss of data, loss of use, and property damage of any kind, direct, incidental or consequential,

in regard to or arising out of the performance or form of the materials presented herein or in any software program(s)

that may accompany this document. When this document is released, it is most compatible with a specified firmware

version. Now that the functionalities of the devices are being developed and improved continuously from time to time

by Suntech, any alteration on the protocol, the firmware functions, the hardware specifications of the product is subject

to change without prior notice.

Copyright

We, at Suntech, notify that Suntech holds all parts of intellectual rights applicable in the copyright laws in all the

countries. The information contained in this document cannot be reproduced in any form without prior written consent

made by Suntech. Any software programs that might accompany this document can be used only in accordance with

any license agreement(s) between the purchaser and Suntech.

Document Amendments

When it comes to the firmware version column with specific firmware number, any amendment(s) on the comments

column should be made on this relevant firmware version (and the versions thereafter). Before applying any changes

made in this protocol, you are required to make sure that you have upgraded the firmware suitable for the specified

version.

Содержание ST940




















































Результаты поиска

Содержание ST940

Отзывы:

SunTech ST940, Руководство пользователя, Страница: 3 / 51

Результаты поиска

Содержание ST940

Отзывы: