Sunsystem SWP 2N 300, Инструкция по установке и эксплуатации, Страница: 15 / 24

ТЕХНИЧЕСКИ ПАСПОРТ. ИНСТРУКЦИЯ за МОНТАЖ и ЕКСПЛОАТАЦИЯ ТЕХНИЧЕСКИ ПАСПОРТ. ИНСТРУКЦИЯ за МОНТАЖ и ЕКСПЛОАТАЦИЯ
15
INSTALLATION and OPERATION MANUAL INSTALLATION and OPERATION MANUAL
SWP NL
300
SWP NL
400
SWP NL
500
Capacity L 300 400 500
Height mm 1695 1669 1895
Diameter D, mm Ø 610 Ø 710 Ø 710
Insulation 50 mm rigid PU
Operating pressure/Maximum temperature bar/
0
C 10/95 10/95 10/95
Test pressure bar 15 15 15
Electric heating (optional) кW 1 x (4.5) 1 x (6) 1 x (7.5)
Weight kg 131 175 196
Cold water inlet A, mm Rp1”/228 Rp1
1/4 “
/260 Rp1
1/2”
/250
Hot water outlet B, mm Rp1”/1476 Rp1 1/4 ” /1420 Rp1 1/2” /1643
Recirculation R, mm, Rp
3/4”
Rp
3/4”
/1224 Rp1”/1180 Rp1”/1392
Operating pressure/Maximum temperature coils S1 bar/
0
C 16/110 16/110 16/110
Test pressure coils S1 bar 25 25 25
Coils capacity S1 L 20.4 23.6 28.3
Coils Heat exchange surface S1 m
2
3.3 3.9 4.6
Inlet/Outlet Lower coi S1 S1i/ S1o, mm,Rp1” 1476/228 1390/260 1626/250
Prolonged power acc. to DIN 4708;
10°C/80°C/45°C, S1
kW (m3/h) 90(2.21) 115(2.70) 130(3.19)
NL- power coefficient at 60°C, S1 NL 60°C 11 14 18
Pressure drop Δp, S1 Δp, mbar 230 379 569
Inspection opening / flange O,Ø, mm Ø110x180/
298
Ø110x180/
345
Ø110x180/
345
Sleeve for Electric element on inspection opening flange Uo,mm, Rp1
1/2”
298 345 345
Drain sleeve Y, mm, Rp1” 30 30 30
Anode P, mm,Rp1
1/4”
1695 1524 1750
Additional sensor sleeve Z1/Z2/Z3, mm, Rp 1/2” 368/812/1204 420/695/1100 433/966/1372
Air vent sleeve F, mm, Rp1” 1695 1669 1895
Sensor sleeve for thermostat G, mm, Rp1/2” 1220 1176 1298