Sunsystem SWP 2N 300, Инструкция по установке и эксплуатации, Страница: 10 / 24

10
ТЕХНИЧЕСКИ ПАСПОРТ. ИНСТРУКЦИЯ за МОНТАЖ и ЕКСПЛОАТАЦИЯ ТЕХНИЧЕСКИ ПАСПОРТ. ИНСТРУКЦИЯ за МОНТАЖ и ЕКСПЛОАТАЦИЯ
INSTALLATION and OPERATION MANUAL INSTALLATION and OPERATION MANUAL
sheme 4
b)Unscrew the three bolts and remove
the front part of the thermostat. Unravel
the power supply wires and connect them
to the terminals of the thermostat
(Figure 5) following the instructions.
sheme 5
sheme 6
C-1LIM.:0,5A/250V~;
C2LIM.:10(2,5)A/250V~;
Terminal – circuit breaker or
switch-on contacts.
Switch-on action – 2B.
Place of installation – normal.
Type of wire – M20 x 1.5.

WARNING !
All installation operations,
including manual adjustments,
must be fulfilled by a qualified
specialist following all safety
conditions.
INSTALLATION AND CONNECTION .
Safety instructions:
Before connecting the thermostat, make
sure that THE UNIT TO BE THERMALLY
CONTROLLED (water heater, pump, etc.)
IS NOT CONNECTED to the power supply
network, and is in compliance with the
instructions in Figure
sheme 2
а) ) See scheme 3 and scheme 4.
sheme 3