Sunsystem BURNIT AMBIENT V2 4G 10 Plus, Инструкция по установке и эксплуатации

Страница: 3 / 32

3
TECHNICAL PASSPORT. INSTALLATION and OPERATION MANUAL TECHNICAL PASSPORT. INSTALLATION and OPERATION MANUAL TECHNICAL PASSPORT. INSTALLATION and OPERATION MANUAL TECHNICAL PASSPORT. INSTALLATION and OPERATION MANUAL
1. EXPLANATION OF SYMBOLS
AND SAFETY INSTRUCTIONS
1.1. Explanation of symbols
CAUTION! - Important
recommendation or warning
concerning safety conditions
during installation and operation of boiler.
DANGER! - fault or improper use
may cause injury or be hazardous
to life of humans or animals.
FIRE HAZARD!
- fault or improper
installation and operation may
cause fire.
INFORMATION- Important
information on the proper
operation of the product.
1.2. Requirements to stove installation
room.
This manual contains important
information for the safe and correct
installation, start-up and trouble-free
operation and maintenance of the boiler.
The Pellet Stove can be used for heating
rooms only in the manner described in
this manual.
The application and any other was the
area of operation is not recommended by
the manufacturer and is not responsible
for the occurrence of defects or failures.
Note the boiler type data on the factory
rating label and the technical data
provided in chapter 10 in order to ensure
proper operation of the product.
1.2.1. Instructions for the installer.
During installation and operation, the
country-specific requirements and
regulations must be observed:
• Local construction regulations on
installation, air supply and exhaust
gas extraction as well as chimney
connection.
• Regulations and norms concerning the
fitting of the heating installation with
safety devices.
• Installation of carbon monoxide detector
is recommended.
• Obligatory maintenance – the pellet
stove must be cleaned immediately
after each consumption of certified
pellets between 800 kg to 1000 kg or
if usage is less at least once a year. This
maintenance must be performed by an
authorized by BURNIT service center. As
long as the pellet stove is in its warranty
period all the maintenance and service
must be performed by the authorized
service who has performed the initial
installation.
i
Use only original BURNiT parts

WARNING! Installation and setup
of the stove should be done
by an authorized specialist /
service shop and must follow the
safety instructions and rules of
operation.

DANGER of intoxication,
suffocation.
Inadequate inflow of fresh air to
the stove room may result in
dangerous leak of exhaust gases
during stove operation.
-
Make sure the air inlets and
exhaust gas outlets are not
clogged or closed.
- If faults are not remedied
immediately, the pellet stove
must not be operated.
- The user must be provided with
written instructions on the fault
and the hazard it entails.

It is mandatory to assure a backup
power generator of corresponding
rated power! (see table 1)

Customer must undergo stove
operation/maintenance training
by authorized installer/service
shop.