Sunsystem BURNIT AMBIENT V2 4G 10 Plus, Инструкция по установке и эксплуатации

Страница: 12 / 32

12
TECHNICAL PASSPORT. INSTALLATION and OPERATION MANUAL TECHNICAL PASSPORT. INSTALLATION and OPERATION MANUAL
7.4. Connecting the pellet stove to the
mains power supply

Such connection must be
performed by a technician /
service shop authorized for such
operations.

Caution! ELECTRIC SHOCK
HAZARD!
- Before opening the unit: switch
off the voltage and secure the
unit against accidental restart.
- Observe installation instructions.
Improper cable connections may
damage the regulator!
The device may be damaged if
struck by a lightning. Make sure
it is unplugged during the storms.
To bring into exploitation the boiler
and auger must be connected to the
electricity network 220V/50Hz with
power cord. Create tight connection with
the electrical mains which complies with
the local regulati
7. Air Temp. Sensor
12. Flue Gas Temp. Sensor
14.Igniter
15.Fan as Primary Combusti on Fan
17.Fan Room
19.Pellets Feeder
22. Safety Temperature Limiter
(Pellets) STB
24.Air Under Pressure Safety
Switch