SunSynk ECCO SUN-3.6K-SG05LP1-EU Скачать руководство пользователя страница 37

Страница: 37 / 71

ECCO SG04LP1 | User Manual

Access the Grid Setup Page (press the GRID icon).

Access the real-time programmable timer/system mode (press the SYSTEM MODE icon).

Access the advanced settings such as Paralleling and Wind Turbine (press the ADVANCE icon).

Access the auxiliary load/smart load settings (press the AUX LOAD icon)

Access the fault code register (press the FAULT CODES icon).

Set up Li BMS (press the LI BMS icon).

5.7. Set Time (Clock)

To set time, click on the BASIC icon and then on ‘Time’

Time.

Date.

AM/PM.

What this page displays:

Adjust / set time.

Adjust / set date.

Adjust / set AM/PM.

What you can do from this page:

How to set up:

Touch the screen on the box you wish to change.

Change the number (increase/decrease) using the UP and DOWN buttons.

Press OK to set the changes.

5.8. Set Company Name / Beeper / Auto dim

To set company name click on the BASIC icon and then on ‘Display’.

Beeper status (ON/OFF)

Installers names.

What this page displays:

Set up your company name.

Switch the beeper ON or OFF.

Set the LCD backlight to auto dim.

What you can do from this page:

Содержание ECCO SUN-3.6K-SG05LP1-EU








































































Результаты поиска

Содержание ECCO SUN-3.6K-SG05LP1-EU

Отзывы:

SunSynk ECCO SUN-3.6K-SG05LP1-EU, Руководство пользователя, Страница: 37 / 71

Результаты поиска

Содержание ECCO SUN-3.6K-SG05LP1-EU

Отзывы: